WAVELENGTH TO THE SQUARE

FIBERFLY GREEN

The FiberFly Green system uses the same innovative technology of the FiberFly system (active fiber doped with Ytterbium) with the integration of a duplication crystal wavelength. The pulse duration of the FiberFly Green laser is 532 nm. The minimum duration is 1 ns and the working frequency is 600 kHz. The FiberFly Green life expectancy is more than 100,000 hours of on time marking due to the “single emitter” diodes and the fully integrated construction of the optical components.

Second Harmonic Generation (SHG) uses a wavelength that is half of the typical 1064 nm wavelength. 532 nm falls into the visible spectrum and is green in colour. This wavelength is produced by transmitting a 1064 nm wavelength through a nonlinear crystal that reduces the wavelength by half. A YVO4 medium is normally used because the characteristics of the beam are well suited for intricate processing.

Typical characteristics of 532 nm wavelength range lasers

CALL ME

CALL ME NOW

Leave your number here and we'll call you NOW!

ADDITIONAL INFORMATION

Power

10-50W

Technology

Active fiber laser doped with Ytterbium

Wavelength

532 nm

Beam quality

M² < 1.8 (measured and real)

Pulse frequency

from 10 KHz to 600 KHz

Pointing laser

Green laser diode coaxial within the laser beam, with marking area simulation to aid the positioning of the part to be marked

Electrical connection

110-230 Vac (L+N+Gnd) 50-60Hz

Maximum absorption

250W

Cooling

Air

Interconnection cable

Stainless steel armoured ø25mm length 3 mt

Operating temperature

15°C – 35°C without condensation

Do you need more information?

Fill out the form next to it, leave your number and we will call you NOW!

TOP