MICROMARK G3

MicroMark G3 is a compact, functional bench laser marker that is able to meet the most varied production requirements while maintaining relatively low prices. The system is designed to also work with a robot thanks to the electric port: the machine is able to work independently by managing the door opening/closing times through the software.
Furthermore, the structure with opening on three sides simplifies the loading and processing of parts longer than the entire machine.

Included in the system is a PC HP, monitor and both FlyCAD / FlyControl software packages with free upgrades. The marking area from ø140 to ø220mm depending on the lens.

PRECISE, SOLID AND COMPACT

Openings on three sides

MicroMark G3 has been developed with a vertical door on three sides so as to guarantee quick and convenient access to the marking compartment. Furthermore, by wearing safety goggles and working with the door open you can also mark large details using a machine that is just slightly larger than a small desk.

Integrated system

On this laser marker, the electrical panel and the laser source are fully integrated into the rear of the machine, avoiding any encumbrance on the work bench. To ensure maximum efficiency, it has an optimal ratio between the size of the work area (590mm) and the external layout (710mm).

Motorized Z axis

Positioning is greatly facilitated thanks to the option of using the Joystick, which becomes an essential tool when combined with the SmartFocus system. This allows the operator to quickly find (on both flat and geometrically complex surfaces with difficult curves or angles) the ideal position for optimal laser marking.

Openings on three sides

MicroMark G3 has been developed with a vertical door on three sides so as to guarantee quick and convenient access to the marking compartment. Furthermore, by wearing safety goggles and working with the door open you can also mark large details using a machine that is just slightly larger than a small desk.

Integrated system

On this laser marker, the electrical panel and the laser source are fully integrated into the rear of the machine, avoiding any encumbrance on the work bench. To ensure maximum efficiency, it has an optimal ratio between the size of the work area (590mm) and the external layout (710mm).

Motorized Z axis

Positioning is greatly facilitated thanks to the option of using the Joystick, which becomes an essential tool when combined with the SmartFocus system. This allows the operator to quickly find (on both flat and geometrically complex surfaces with difficult curves or angles) the ideal position for optimal laser marking.

Learn more

Fill out the form below and receive our brochure on Micromark G3

PRIVACY PROTECTION | Filling and submitting this form you consent to the processing of your personal data pursuant to Art. 13 of Legislative Decree 30.6.2003.