RotoMark is a laser marking machine equipped with a rotating table with a mechanical cam which has from 2 to 8 workstations. It allows marking of both small and large parts by loading and marking at the same time. The ability to load and unload while marking optimizes machine reducing the time of work on the production line.
RotoMark is designed for the highest productivity and can be optimized for individual part marking, an array of parts, or a very large part. The programmable motorized Z axis, operated by the FlyCAD marking software provides a significant range in focus to be able to mark from 0 to 300mm.
Rotomark was designed for those who have high productivity requirements and those who need to mark large articles, but it is also extremely functional when working on a single article or a small set. The Z axis is operated by the FlyCAD marking software, and allows marking details within a broad range of thicknesses, from 0 to 300mm.
Rotomark is extremely rigid and ergonomic: its frame was developed entirely in welded steel. After thermal expansion, the frame is carefully finished to create support surfaces for screws and sliding guides, resulting in the following advantages.
With a rear door, RotoMark becomes exactly like a traditional machine and therefore allows for small marking runs that would not warrant setting up the index table (template), or allows conveniently centering the design with the template and the article right in front of you.
Request a Free Consultation
One of our experts is ready to answer your questions and advise you on the best solution.
Technical Features
Working Position
Stand Up
Rotating Table size
ø1000
Available Marking Area
ø140 with FFL160
ø220 with FFL254
Maximum Marking height
300 mm with FFL140
Type of laser
Optic Fiber or MOPA
20-30-50-100W
Maximum weight on the plane
20 Kg
Type of door
Manual
Machine size
Height: 1940 mm
Length: 1200 mm
Depth: 1700 mm
